Grounding Method for Reliable Operation of Power and Distribution Transformers Substation

Grounding Method for Reliable Operation of Power and Distribution Transformers Substation

Equipment grounding is a necessary and conclusive parts of an installation process in electrical power system networks particularly in power substations. Over years, grounding or earthing of substations has been carried out primarily through preparation of an earth mat which is simply interconnected with several Earth-rods buried around the substation or any other equipment under installation. Apart from the fact that this approach is old, it is in addition required several efforts to have an acceptable and reliable results. Thus, a more sophisticated, reliable and results oriented is required to be in place. This paper presents a modern approach to earthing of transformer substations and other allied equipment. The approach negates the constraints that are obtained in the old approach. A 15MVA, 33/11kV power transformer substation as well as a 500kVA, 11/0.415kV distribution transformer substation’s installations were selected as the case study. A flow chart which describe the procedures of carrying out the proposed modern method of earthing is developed and applied to the two case studies.   The various earth resistances measured on both cases are presented and discussed. The results from these case study indicates that the earth resistance values obtained from this new approach are reliable and in compliance with IEEE Standards 80,142, 81 and 1100.

Author(s) Details

Dr. Lambe Mutalub Adesina
Department of Electrical and Computer Engineering, College of Engineering and Technology, Kwara State University, P.M.B. 234, Malete, Ilorin, Nigeria.

Tolulope O. Akinbulire
Department of Electrical and Electronic, Faculty of Engineering, University of Lagos, Nigeria.

View Book :- http://bp.bookpi.org/index.php/bpi/catalog/book/184

Editor 251News

leave a comment

Create Account



Log In Your Account